Pairing HC-100 to Bluetooth

1. Go to settings.

2. Go to connections.

3. Go to Bluetooth.

4. Click on add new device.

5. Click on which device you are using. Then tap next.

6. Type in 1234 in the password box. Then tap Next.

7. Click Advanced on the pop-up message to go to Partnership SettingsCheck the Serial Port box.  Click Save.


NOTE: If the Advanced button disappears, clicking on the device under Disconnected (in the Devices screen) will bring the Partnership Settings again.










8. Click on COM Ports

9. Click on New Outgoing Port

10. Click on the device you are using. Then tap next.

11. Click the drop-down symbol.

12. Click on COM5 or any other un-used COM port except for COM0.

13. Uncheck the secure connection box. Then tap Finish.

14. Click OK.

15. Click on the windows icon.

16. Make sure Bluetooth is on. Then click Vitals Mobile.

17. Click on Controller.

18. Click Yes to Auto Connect.

19. Bluetooth bar should be in blue indicating Bluetooth connection. 

20. If this process does not work refer to HC-100 Bluetooth cleaning instructions.